Freedom Designs TriPod LT - Manual (Page 34)

FREEDOM DESIGNS, INC. ● 2241 Madera Rd. Simi Valley, CA. 93065 ● 800-331-8551 ● Fax 888-582-1509
www.freedomdesigns.com
32
Summary
Congratulations on your
TriPod ™ LT purchase. Following is a brief summary to refer to if you
have any questions. Remember: the entire Operating Manual should be read before your new
chair is used. For any questions, please call your authorized Freedom Designs, Inc. dealer or
Freedom Designs, Inc. customer service at 1-800-331-8551.
(Always lock the push to lock wheel locks before adjusting the wheelchair).
Unfolding the TriPod
™
LT
1. Place tires on quick release axles and push in until quick release push button
“pops out” and wheels are secure.
2. Lift up on the back assembly until it “clicks” into place.
3. When arms are used, place in the usable position.
4. Place cushion on hook/loop strips on seat sling.
Folding the TriPod ™ LT
1. Remove cushion from sling seat.
2. Lift the backrest release lever and fold the back forward, onto the seat.
3. Squeeze quick release axle button and pull wheel off of the frame.
Quick Release Axle:
1. Unlock the wheel locks.
2. Grasp the frame with one hand.
3. With your other hand, squeeze the quick release button.
4. The wheel will then pull off easily.
Push to Lock Wheel Lock: To Lock
1. Grasp the lever of the wheel lock with your hand.
2. Push the lever forward to a locked position.
To Unlock
1. Grasp the lever of the wheel lock with your hand.
2. Pull the lever back to release the wheel lock.