Freedom Designs Freedom NXT - Manual (Page 98)

FREEDOM DESIGNS, INC.
89
WPCNXT 62013
Seating Dynamics
1500 W. Hampden Ave. Unit 3 - C • Englewood, Colorado 80110 USA • p 303-986-9300 f 303-986-9301
Several years in the works, the Seating Dynamics
dynamic footrest came to life in September 2012. Drawing
from the forty plus years of automotive, aircraft and LaBac
experience, Greg Peek’s latest creation is a Patent Pending
dynamic footrest. A fresh design from a blank screen, this
clean and elegant precision piece of equipment accomplishes
what no other footrest has ever done!
Operating much like an automotive shock absorber the
unit offers up to three different movements:
• Dynamic Semi-Elevating. Up to 30° of elevating travel
at the knee. Initial angle may be set at:
90°, 70°, 60°, 50°, or 40° and has 30° of dynamic travel
beyond that initial setting.
• Drop: Low Pivot - 13“ - 15“ or 15“ - 17“
• Drop: High Pivot - 8 ½“ - 10 ½” or 10 ½ - 12 ½“
• Optional non-elevating angle adjustable knee.
( 7.5° incremental adjustment )
• Drop: 14“ - 16“ or 16“ - 18“
• Telescoping, 1 ½“ of telescopic travel with three different
spring rates privided, 30, 40 & 60 pounds of force.
• Dynamic Plantar / Dorsi movement, ± 10° of travel.
SD -Dyn Ft 42013
Available for many different wheelchairs from:
Freedom Designs, Gunnell, Invacare, Ki Mobility,
Permobil, Quickie, Ti Lite
ynamics
D
S
eating
We make wheelchairs better!
Dynamic Footrest Assembly
to fit almost any wheelchair!
Elevating Elastomer
Upper Housing
Telescoping Spring
30 lb - Yellow
40 lb - Blue (installed)
60 lb - Green
Lock Nut
Lower Housing
Lower Leg Length Adjustment
Clamp Screws
Initial Angle
Setting Screw
(4mm Allen Wrench)
Dynamic P/D
Housing
Extension Piston
Seating Dynamics energy absorbing components can turn
almost any wheelchair into a dynamic wheelchair, adding
function and durability. The results, less breakage and
repairs, more uptime and you may see theraputic benefits!
www.seatingdynamics.com
(4mm Allen Wrench)
(use Spanner
wrench supplied
only)
Anti-Rotation
Adjusting Screw,
Turn in until snug,
back out up to
1/6 of a turn to
set.
(5mm Allen Wrench)
Lower Clamp/Retainer
Assy.
Hangers—3D Dynamic Legrests OEM Parts (cont.)