Freedom Designs Gizmo Tilt in Space - Manual (Page 27)

Gizmo
25
Main Frame
Latch Style Swing Away Hangers
The
Gizmo frames ship standard with swing-away
hangers in 75° or 90°
1. To swing away the hanger, place your hand on the
hanger release lever.
2. Pull back on the lever towards the chair. This will
enable the hanger to swing away for ease of
transfer.
3. To remove the hanger, lift the hanger upward until
the pivot saddle is out of it’s receiver on the frame.
4. To attach the hanger, insert the pivot bushing into
the frame receiver tube, at an angle as shown.
Rotate the hanger inward until the latch snaps into
place.