General warnings – Freedom Designs Gizmo Tilt in Space User Manual

Page 6

Advertising
background image

Freedom Designs, Inc.

4

Warnings & Caution

statements included in this manual describe conditions and unsafe

practices which might result in bodily injury or property damage. Read this entire manual
before assembly or operation of this wheelchair. If you do not understand any of the
instructions in this manual, call your authorized Freedom Designs, Inc. dealer. Note: Where
they apply, you will also find “Warnings” in other sections of this manual. Heed all warnings in
this section. If you fail to heed these warnings, damage to your chair, a fall, tip-over or loss of
control may occur and cause severe injury to the rider or others.

The weight limit for the

Gizmo

non-tilt

is a 200 lb. person. If the person

exceeds the weight limit, damage to the chair, a fall, tip-over or loss of control
may cause severe injury to the rider or others.

Every wheelchair is different.

Become familiar with your chair before you

begin riding. Start slowly, with easy, smooth strokes. Be careful not to use too
much force, which might result in tipping over, damage to your chair, a fall or
loss of control, which may occur and cause severe injury to the rider or others.

Reduction of Risk of an Accident:
1. BEFORE riding, you should be trained in the safe use of this chair by your

health care advisor.

2. Practice bending, reaching and transfers until you know the limit of your

ability. In order to avoid tipping over, have someone help you, until you
know what can cause a fall.

3. Be aware that you must develop your own methods for safe use best suited

to your level of function and ability.

4. NEVER try a new maneuver on your own, until you are sure you can do it

safely.

5. Get to know the areas where you plan to use your chair. Look for hazards

and learn how to avoid them.

6. Always use anti-tip tubes downward, so as you are not at risk to tip over.
If you fail to heed these warnings, damage to your chair, a fall, tip-over or
loss of control may occur and cause severe injury to the rider or others.

Safety Checklist
Before each use of your chair:
1. Make sure the chair rolls easily and that all parts work smoothly. Check for

noise, vibration, or a change in ease of use. (They may indicate low tire
pressure, loose fasteners, or damage to your chair).

2. Repair any problems. Consult your Freedom Designs, Inc. authorized

dealer for help in finding or correcting the problem.

3. Check to see that both quick-release axles are locked. When locked, the

axle button will “pop out” fully. If not locked, the wheel may come off and
cause you to fall.

4. Anti-tip tubes need to be locked in the downward position during usage.
If you fail to heed these warnings, damage to your chair, a fall, tip-over or
loss of control may occur and cause severe injury to the rider or others.

W

A
R
N

I

N

G

!

General Warnings

Advertising