Freedom Designs Freedom SP3 - Manual (Page 20)

Freedom Designs, Inc. SP3
18
Initial Inspection Checklist
The SP3 is shipped in the following fashion:
1. The main frame with backposts, casters, tires,
with quick release axles, armrests*, footplates
or footboard and anti-tip tubes. (Refer to the
Unfold instructions in this manual).
2. Solid Seat & Back Insert**.
3. Optional armrests would be attached to the
backposts or solid seat insert.
*Armrest might be optional, dependent upon
frame.
**Solid Seat & Back Insert are optional.
When Unpacking:
1. Check for any obvious damage to the box or
its contents.
2. Remove all the loose packing from the box.
3. Carefully remove all of the components.
4. Examine the exterior of the
SP3
and the
components for any nicks, dents, scratches
or other damage.
SP 3