Freedom Designs Freedom SP3 - Manual (Page 32)

Freedom Designs, Inc. SP3
30
Flip-up Individual Footplates
The
SP3
is shipped with individual flip-up footplates
(molded composite or angle adjustable aluminum)
attached or a solid footboard unattached. Adjustment
of the individual flip-up footplates are as follows:
1. The individual footplates easily flip by lifting
underneath the footplate to flip up or push down
on the footplate to flip down.
2. To adjust the height of the footplate :
Composite Footplate
Remove the button head screw securing the footrest
extension tube to the hanger tube. Set the footplate at
the desired height. Insert the screw into the hanger
tube and tighten.
Aluminum Angle Adjustable Footplate
Remove the hex head screws on the side of the hanger.
Seat the footplate at the desired height. Insert the
screws through holes in the hanger tube and tighten.
Main Frame
continued…..