Freedom Designs Freedom SP3 Mini - Manual (Page 27)

25
Freedom Designs, Inc. SP3 “Mini” Series
Folding the SP3 “Mini”
continued………...
3. Flip back the armrests to the upright position.
Or push the T-arm release lever toward the
center post to release the arm from the receiver
socket. Lift arm out of socket.
4. Pull up on the trigger mechanism for the back-
posts and push the backposts to the flat position
over the seat rails.
5. Pull up on nylon crossbrace strap.
Note: The T-arms need not be removed to fold the
SP1 / SP3 but must be removed to fold the
backposts down.
Note: Use the provided nylon strap to fold the chair.
Be careful not to place your fingers between the
folding crossbrace.