Troubleshooting, Freedom designs, inc. sp3 “mini” series – Freedom Designs Freedom SP3 Mini User Manual

Page 44

Advertising
background image

42

Freedom Designs, Inc.

SP3 “Mini” Series

Troubleshooting

All

SP3 “Mini”

wheelchairs leave the factory inspected and adjusted for immediate use,

(aside from the unfolding procedure). This troubleshooting chart offers some sugges-
tions regarding the use of your wheelchair. Some areas may require more investigation
to find the most suitable solution for a specific problem. A complete inspection, safety
check and servicing should be made by an authorized dealer at least once a year. Any
Problems should be directed to your authorized dealer or call our customer service de-
partment.

Symptoms Remedies

The wheelchair veers right

Check that both casters contact the ground at
the same time.
Check that the tire pressure is correct and
equal in both rear wheels.

The wheelchair veers left

Check that both casters contact the ground at
the same time.
Check that the tire pressure is correct and
equal in both rear wheels.

Sluggish turn or performance

Check that all nuts and bolts are tight.
Check that the tire pressure is correct and
equal in rear wheels.

Caster Flutter

Check that all nuts and bolts are tight.
Check that both casters contact the ground at
the same time.
Check for wear of casters.

Squeaks and rattles

Check that all nuts and bolts are tight.

Looseness in the wheelchair

Check that all nuts and bolts are tight.

Advertising