Power windows – BMW X3 xDrive35i 2011 User Manual

Page 43

Advertising
background image

Indicator lamp on the interior rearview

mirror

The indicator lamp flashes briefly every
2 seconds:
The system is armed.

The indicator lamp flashes after locking:
The doors, hood or tailgate is not closed
properly, but the rest of the vehicle is se‐
cured.
After 10 seconds, the indicator lamp flashes
continuously. The interior motion sensor is
not active.

The indicator lamp goes out after unlocking:
The vehicle has not been tampered with.

The indicator lamp flashes after unlocking
until the engine is started, but no longer than
approx. 5 minutes:
An alarm has been triggered.

Tilt alarm sensor

The tilt of the vehicle is monitored.
The alarm system responds in situations such
as attempts to steal a wheel or tow the car.

Interior motion sensor

The windows and glass sunroof must be closed
for the system to function properly.

Avoiding unintentional alarms

The tilt alarm sensor and interior motion sensor
can be switched off together, such as in the fol‐
lowing situations:

In automatic car washes

In duplex garages.

During transport on car-carrying trains, at
sea or on a trailer.

When animals are to remain in the vehicle.

Switching off the tilt alarm sensor and

interior motion sensor

Press the button on the remote control
twice in succession.

The indicator lamp lights up for approx. 2 sec‐
onds and then flashes continuously.
The tilt alarm sensor and interior motion sensor
are switched off until the vehicle is locked again.

Power windows

General information

Take the remote control with you
Take the remote control with you when

leaving the vehicle so that children, for example,
cannot operate the power windows and injure
themselves.◀

Opening

Press the switch to the resistance

point.
The window opens while the switch is held.

Press the switch beyond the resist‐

ance point.
The window opens automatically.

Pressing again stops the motion.

Closing

Danger of pinching
Monitor the closing process and make

sure that the closing path of the window is clear;
otherwise, injuries may result.◀

Pull the switch to the resistance point.

The window closes while the switch is held.

Seite 43

43

Online Edition for Part no. 01 40 2 606 190 - 12 10 500

Reference

Mobility

Communication

Entertainment

Navigation

Driving tips

Controls

At a glance

Advertising
This manual is related to the following products: