Service requirements – BMW X3 xDrive35i 2011 User Manual
Page 73
The date format is stored.
Language
Setting the language
To set the language on the Control Display:
1.
"Settings"
2.
"Language/Units"
3.
"Language:"
4.
Select the desired language.
The setting is stored for the remote control cur‐
rently in use.
Units of measure
Setting the units of measure
To set the units for fuel consumption, route/dis‐
tance and temperature:
1.
"Settings"
2.
"Language/Units"
3.
Select the desired menu item.
4.
Select the desired unit.
The setting is stored for the remote control cur‐
rently in use.
Brightness
Setting the brightness
To set the brightness of the Control Display:
1.
"Settings"
2.
"Control display"
3.
"Brightness"
4.
Turn the controller until the desired bright‐
ness is set.
5.
Press the controller.
The setting is stored for the remote control cur‐
rently in use.
Depending on the light conditions, the bright‐
ness control may not be clearly visible.
Service requirements
Display
The driving distance or the time to the next serv‐
ice is displayed briefly after the ignition is
switched on.
The current service requirements can be read
out from the remote control by the service spe‐
cialist.
Seite 73
73
Online Edition for Part no. 01 40 2 606 190 - 12 10 500