Loading, Things to remember when driving – BMW Z4 sDrive35is 2011 User Manual

Page 114

Advertising
background image

Never allow floor mats, carpets or any other ob‐
jects to protrude into the area of pedal move‐
ment and impair pedal operation.◀

Brake disc corrosion

Corrosion on the brake discs and contamination
on the brake pads are furthered by:

Low mileage.

Extended periods when the vehicle is not
used at all.

Infrequent use of the brakes.

Corrosion occurs when the minimum pressure
that must be exerted by the pads during brake
applications to clean the discs is not reached.
Should corrosion form on the brake discs, the
brakes will tend to respond with a pulsating ef‐
fect that generally cannot be corrected.

Condensation under the parked vehicle

When using the automatic climate control, con‐
densation water develops that exits underneath
the vehicle.
Therefore, traces of condensed water under the
vehicle are normal.

Loading

Overloading the vehicle
To avoid exceeding the approved carrying

capacity of the tires, never overload the vehicle.
Overloading can lead to overheating and in‐
creases the rate at which damage develops in‐
side the tires. This could result in a sudden loss
of tire inflation pressure.◀

Secure heavy objects
Never transport unsecured heavy or hard

objects in the passenger compartment, as they
could be thrown around and pose a safety haz‐
ard to the vehicle's occupants during abrupt
braking or evasive maneuvers.◀

No fluids in the trunk
Make sure that fluids do not leak into the

trunk; otherwise, the vehicle may be dam‐
aged.◀

Determining the load limit

1.

Locate the following statement on your ve‐
hicle’s placard*:

The combined weight of occupants and
cargo should never exceed XXX kg or
YYY lbs. Otherwise, damage to the ve‐
hicle and unstable driving situations may
result.

2.

Determine the combined weight of the
driver and passengers that will be riding in
your vehicle.

3.

Subtract the combined weight of the driver
and passengers from XXX kilograms or YYY
pounds.

4.

The resulting figure equals the available
amount of cargo and luggage load capacity.
For example, if the YYY amount equals
1,400 lbs and there will be five 150 lbs pas‐
sengers in your vehicle, the amount of avail‐
able cargo and luggage load capacity is
650 lbs: 1,400 lbs minus 750 lbs = 650 lbs.

5.

Determine the combined weight of luggage
and cargo being loaded on the vehicle. That
weight may not safely exceed the available
cargo and luggage load capacity calculated
in Step 4.

6.

If your vehicle will be towing a trailer, load
from your trailer will be transfered to your
vehicle. Consult the manual for transporting
a trailer to determine how this may reduce
the available cargo and luggage load ca‐
pacity of your vehicle.

Seite 114

114

Online Edition for Part no. 01 41 2 604 231 - 03 10 500

Things to remember when driving

Advertising
This manual is related to the following products: