Opening and closing windows jointly 38, Opening and closing rear win‐ dows 38, Opening and closing front win‐ dows 38 – BMW Z4 sDrive35is 2011 User Manual

Page 38: Opening and closing

Advertising
background image

Opening, closing

Individually

Press the switch to the resistance point:
The window opens while the switch is held.
Closing can be performed in the same man‐
ner by pulling the switch.

Press the switch beyond the resistance
point:
The window opens automatically.
Press the switch again to stop the opening
movement.

Jointly

Press the switch to the resistance point:
All windows open while the switch is held.
Closing can be performed in the same man‐
ner by pulling the switch.

Press the switch beyond the resistance
point:
All windows open automatically.
Press the switch again to stop the opening
movement.

Convenience operation

Convenience operation via the

remote control,

refer to page 30,

or the

door lock, refer to

page 32

.

Convenient closing with

Comfort Access, refer

to page 31

.

After the ignition is switched off

When the remote control is removed or the ig‐
nition is switched off, the windows can continue
to be operated for approx. 1 minute as long as
no door is opened.

Pinch protection system

If the closing force exceeds a specific value as
one of the front side windows closes, the closing
action is interrupted.
The window reopens slightly.

Danger of pinching even with pinch pro‐
tection

Even with the pinch protection system, check
that the window's closing path is clear; other‐
wise, the closing action may not stop in certain
situations, e.g., if thin objects are present.◀

Do not use window accessories
Do not install any accessories in the range

of movement of the windows; otherwise, the
pinch protection system will be impaired.◀

Closing without the pinch protection

system

For example, if there is an external danger or if
ice on the windows prevents a window from
closing normally, proceed as follows:

1.

Pull the switch past the resistance point and
hold it there. Pinch protection is limited and
the window reopens slightly if the closing
force exceeds a certain value.

2.

Pull the switch past the resistance point
again within approx. 4 seconds and hold it
there.
The window closes without pinch protec‐
tion.

Seite 38

38

Online Edition for Part no. 01 41 2 604 231 - 03 10 500

Opening and closing

Advertising
This manual is related to the following products: