BMW Z4 sDrive35is 2011 - Manual (Page 130)

Destination guidance
Starting destination
guidance
1. "Navigation"
2. "Enter address"
3. Select the destination.
4. "Accept destination"
5. "Start guidance"
The route is displayed on the Control Display
after it is calculated.
The distance to the destination/intermediate
destination and the estimated time of arrival are
displayed in the map view.
Terminating destination
guidance
1. "Navigation"
2. "Map"
3. Select the symbol.
4. "Stop guidance"
Continuing destination
guidance
If the destination was not reached during the last
trip, destination guidance can be resumed.
"Resume guidance"
Route criteria
General information
▷ The route calculated can be influenced by
selecting certain criteria.
▷ The route criteria can be changed as often
as necessary when the destination is en‐
tered and during destination guidance.
▷ Road types, such as highways or curvy
roads, are part of the navigation data and are
taken into consideration when planning a
route. As a result, the routes recommended
by the navigation system may not always be
the same ones that you would choose based
on personal experience.
▷ The settings are stored for the remote con‐
trol currently in use.
Changing the route criteria
1. "Navigation"
2. "Map"
3. "Route preference"
4. Select the criterion:
▷ "Fast route": time-optimized route, be‐
ing a combination of the shortest possi‐
ble route and the fastest roads.
▷ "Efficient route": optimized combina‐
tion of the fastest and shortest route.
▷ "Short route": short distance, irrespec‐
tive of how fast or slow progress will be.
▷ "Alternative routes": other suggested
alternative routes while destination
guidance is active.
5. Specify additional criteria for the route, if
necessary:
▷ "Avoid highways": highways are
avoided wherever possible.
▷ "Avoid toll roads": toll roads are avoided
wherever possible.
Seite 130
130
Online Edition for Part no. 01 41 2 604 231 - 03 10 500
Destination guidance