Gear sport automatic transmission with dual clutch, Gear display for 7-gear sport automatic, Transmission with dual clutch* 58 – BMW Z4 sDrive35is 2011 User Manual

Page 58: Driving

Advertising
background image

7-gear sport automatic

transmission with dual

clutch*

The concept

This transmission is an automated manual
transmission with two clutches and two gearbox
components in which the gears are changed
without loss of torque.
The transmission is operated using the selector
lever and two shift paddles on the steering
wheel.
Functions:

Choice of manual or automatic operation:
manual mode or drive mode.

Automatic downshifting and protection
against selecting the wrong gear, even in
manual mode.

Acceleration assistant, Launch Control, re‐

fer to page 60

.

Automatic throttle blip.

System limits

This transmission is equipped with an overheat‐
ing protection system that protects the clutches
against extremely high loads.

The indicator lamp lights up yellow if
the transmission becomes too warm.
Avoid high engine loads and driving off

frequently.
If the transmission overheats, the indicator lamp
lights up red and power flow to the engine is in‐
terrupted. You can only continue driving after
the transmission has cooled down.

Avoid driving off frequently with high accelera‐
tion and do not hold the vehicle on inclines by
depressing the accelerator lightly; otherwise,
the transmission may overheat.

Transmission positions

P R N D M/S + –

Displays in the instrument cluster

P, R, N, D1 to D7, S1 to S7, M1 to M7
The transmission position and the gear cur‐
rently engaged are displayed.

Engaging transmission positions N, D,

R

Transmission position P can only be disen‐
gaged if the engine is running.

Before moving the lever away from P or N
with the vehicle stationary, depress the
brake; otherwise, the transmission will not
shift.

Press on the brake pedal until you start
driving

To prevent the vehicle from creeping after you
select a driving position, maintain pressure on
the brake pedal until you are ready to start.◀

Briefly push the selector lever in the desired di‐
rection, beyond a resistance point if necessary.
When shifting out of P or into R, press button 1
at the same time.
The engaged transmission position is also dis‐
played on the selector lever.
When you release the selector lever, it returns to
its center position.

Seite 58

58

Online Edition for Part no. 01 41 2 604 231 - 03 10 500

Driving

Advertising
This manual is related to the following products: