High beams/roadside parking lamps, High-beam assistant, High-beam assistant* 77 – BMW Z4 sDrive35is 2011 User Manual

Page 77: High beams, head‐ lamp flasher 77, Roadside parking lamps* 77, High-beam assistant*, refer to, Roadside parking lamps, refer to

Advertising
background image

High beams/roadside parking

lamps

1 High beams
2 Headlamp flasher
3 Roadside parking lamps*

Left and right roadside parking lamps*

There is an additional option of switching on the
lamps on the side of the car facing the road when
parked.

Switching on

After parking the vehicle, press the lever up or
down beyond the pressure point for a longer pe‐
riod, arrow 3.
The roadside parking lamps drain the battery.
Therefore, do not leave them on for unduly long
periods of time; otherwise, the battery might not
have enough power to start the engine.

Switching off

Press the lever in the opposite direction to the
pressure point, arrow 3.

High-beam Assistant*

The concept

When the lights are switched on, this system
automatically switches the high beams on and
off. The procedure is controlled by a sensor on
the front of the interior rearview mirror. The as‐
sistant ensures that the high beams are
switched on whenever the traffic situation al‐
lows. The driver can intervene at any time and
switch the high beams on and off as usual.

Activating the High-beam Assistant

1.

Turn the light switch to .

2.

With the low beams switched on, briefly
push the turn indicator lever in the direction
of the high beam.

The indicator lamp in the instrument
cluster lights up.
When the lights are switched on, the

high beams are switched on and off automati‐
cally.
The system responds to light from oncoming
traffic and traffic driving ahead of you, and to ad‐
equate illumination, e.g., in towns and cities.

Switching the high beams on and off

manually

High beams on, arrow 1.

High beams off/headlamp flasher, arrow 2.

To reactivate the High-beam Assistant, briefly
push the turn indicator lever toward the high
beams.

System limits

Personal responsibility
The High-beam Assistant cannot serve as

a substitute for the driver's personal judgment
of when to use the high beams. Therefore, man‐
ually switch off the high beams in situations
where this is required to avoid a safety risk.◀
The system is not fully functional in situations
such as the following, and driver intervention
may be necessary:

In very unfavorable weather conditions,
such as fog or heavy precipitation.

Seite 77

77

Online Edition for Part no. 01 41 2 604 231 - 03 10 500

Reference

Mobility

Communication

Entertainment

Navigation

Driving tips

Controls

At a glance

Advertising
This manual is related to the following products: