BMW 335i Convertible 2010 - Manual (Page 69)

Re
fe
re
n
c
e
A
t a
g
lanc
e
Co
n
tr
o
ls
D
riv
in
g tip
s
M
o
b
ilit
y
67
6 Initializing the Flat Tire Monitor 75
Resetting the Tire Pressure Monitor 77
7 Setting the time 69
8 Setting the date 70
9 Viewing service requirement display 68
10 Setting formats and units of measure,
resetting to factory settings 67
11 Adjusting settings
> Confirmation signals when locking and
unlocking the vehicle
21
> Response during unlocking
procedure
19
> Automatic locking 23
> Pathway lighting 83
> Daytime running lights 84
> Triple turn signal activation 54
> Seat memory * 41
Exiting displays
The outside temperature reading and the time
reappear when you press button
2 or if you
make no entries within approx. 15 seconds. If
required, complete the current setting first.
Formats and units of measure
You can set formats and units of measure.
1. Switch on the ignition, refer to page 49 .
2. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the sym-
bol appears in the display accompanied by
the word "SET".
3. Press button 2.
4. Use button 1 to select desired format or
desired unit of measure, e.g. for fuel con-
sumption.
> Fuel consumption: mpg, km/l,
l/100km
> Distance covered: mls, km
> Time: 12h, 24h format
> Date: day.month dd.mm,
month/day mm/dd
> Temperature: 7, 6
5. Press button 2.
6. Use button 1 to make the setting.
7. Press button 2.
The setting is stored for the remote control
currently in use.
Resetting to factory settings
You can reset the settings for formats and units
of measure to the factory settings.
1. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the sym-
bol appears in the display accompanied by
the word "SET".
2. Press button 2.
Online Edition for Part no. 01 41 2 603 012 - © 08/09 BMW AG Online Edition for Part no. 01 41 2 603 012 - © 08/09 BMW AG