Adaptive light control, High beams/roadside parking lamps, High-beam assistant – BMW 335i Convertible 2010 User Manual

Page 87

Advertising
background image

Re

fe

re

n

c

e

A

t a

g

lanc

e

Co

n

tr

o

ls

D

riv

in

g tip

s

M

o

b

ilit

y

85

Adaptive light control*

The concept

Adaptive light control is a variable headlamp
control system that enables better illumination
of the road surface. Depending on the steering
angle and other parameters, the light from the
headlamp follows the course of the road.
In tight curves at speeds up to 40 mph/70 km/h,
e.g. on mountainous roads or when turning, an
additional, corner-illuminating lamp is switched
on that lights up the inside area of the curve.

Activating Adaptive Light Control

With the ignition switched on, turn the light
switch to position

3, refer to page

83

.

The corner-illuminating lamp is switched on
automatically, depending on the steering wheel
angle or turn signal indicator.
Standstill function

*

: to avoid blinding oncoming

traffic, the adaptive light control directs light
towards the front passenger side when the
vehicle is at a standstill.
When you are reversing, only the corner-illumi-
nating lamps are active and switched on on
both sides.

Malfunction

The LED next to the symbol for automatic head-
lamp control flashes. Adaptive light control is
malfunctioning or has failed. Have the system
checked as soon as possible.

High beams/roadside parking

lamps

1 High beams
2 Headlamp flasher
3 Roadside parking lamps

*

Roadside parking lamps, left or right*

There is an additional option of switching on the
lamps on the side of the car facing the road
when parked.

Switching on

After parking the vehicle, press the lever up or
down beyond the pressure point for a longer
period, arrow

3.

The roadside parking lamps drain the bat-
tery. Therefore, do not leave them on for

unduly long periods of time; otherwise, the bat-
tery might not have enough power to start the
engine.

<

Switching off

Press the lever in the opposite direction to the
pressure point, arrow

3.

High-beam assistant*

The concept

This system automatically switches the high
beams on and off. The procedure is controlled
by a sensor on the front of the interior rearview
mirror. The assistant ensures that the high
beams are switched on whenever the traffic sit-
uation allows. It handles this task for you and
gives you the benefit of the best possible view.

Online Edition for Part no. 01 41 2 603 012 - © 08/09 BMW AG

Online Edition for Part no. 01 41 2 603 012 - © 08/09 BMW AG

Advertising