Driving – BMW 335i Convertible 2009 User Manual

Page 66

Advertising
background image

Driving

64

personal responsibility, alertness and aware-
ness in adjusting speed, braking or otherwise
controlling the vehicle. The driver should
decide when to use the system on the basis of
road, traffic, visibility, and weather conditions.
Active cruise control is intended for use on
highway-type roadways where traffic is moving
relatively smoothly. Do not use this system in
city driving; heavy traffic such as during rush
hour; on curvy, winding roads, slippery roads or
roads with sharp curves such as highway off-
ramps; during inclement weather such as snow,
strong rain or fog; or when entering inter-
changes, service/parking areas or toll booths.
It is also important to regulate your vehicle's
speed and distance setting within applicable
legal limits. Always be ready to take action or
apply the brakes if necessary, especially when
the system is actively following a vehicle in front
of you. Otherwise driving situations could result
that pose the risk of accidents.

<

One lever for all functions

1 Store and increase desired speed
2 Store and decrease desired speed
3 Deactivate system, refer to page

65

4 Resume stored desired speed and dis-

tance, refer to page

66

5 Select distance to vehicle driving ahead,

refer to page

65

Storing current speed

Briefly press the lever, arrow

1, or briefly pull it,

arrow

2, at a driving speed of more than approx.

20 mph or 30 km/h.

The car's current speed is stored. It is displayed
on the speedometer and briefly in the instru-
ment cluster.

Increasing desired speed

Press or tap the lever to the resistance point or
beyond, arrow

1, until the desired speed is dis-

played.

>

Each time the lever is tapped to the resis-
tance point, the desired speed is increased
by approx. 1 mph or 1 km/h.

>

Each time the lever is tapped beyond the
resistance point, the desired speed is
increased by up to 5 mph or 10 km/h until
the maximum speed of 110 mph or
180 km/h is achieved.

The speed then displayed is stored and
achieved on a clear road.

Decreasing desired speed

Pull the lever, arrow

2, until the desired speed is

displayed.
The other functions work analogously to those
described under Increasing desired speed.

Online Edition for Part no. 01 41 2 600 967 - © 09/08 BMW AG

Advertising