Driving – BMW 328i xDrive Sports Wagon 2009 User Manual

Page 58

Advertising
background image

Driving

56

Changing selector lever positions

>

With the ignition switched on or the engine
running, the selector lever can be moved
out of position P: interlock.

>

Before moving the lever away from P or N
with the vehicle stationary, first depress the
brake; otherwise the selector lever will
refuse to move: shiftlock.

To prevent the vehicle from creeping
after you select a driving position,

depress the brake until you are ready to
start.

<

A lock prevents you from inadvertently engag-
ing selector lever positions R and P. To cancel
the lock, press the button on the front of the
selector lever, see arrow.

P Park

Select this only when the vehicle is stationary.
The rear wheels are locked.

R Reverse

Select this only when the vehicle is stationary.

N Neutral

You can select this in a car wash, for example.
The vehicle can roll.

D Drive, automatic position

Position for normal vehicle operation. All for-
ward gears are selected automatically.
Under normal operating conditions, fuel con-
sumption is lowest when you are driving in posi-
tion D.

Kick-down

Kick-down enables you to achieve maximum
performance.
Press the accelerator pedal beyond the full-
throttle resistance point.

Sport program and manual operation
M/S

Move selector lever from position D toward the
left into the M/S shifting slot:
The sport program is activated and DS is dis-
played in the instrument cluster. This position is
recommended for a performance-oriented driv-
ing style.
To use the automatic mode again, move the
selector lever to the right into position D.

Shifting gears via the selector lever

When you press the selector lever forwards or
backwards, the manual mode is activated and
Steptronic changes gear. M1 through M6 are
displayed in the instrument cluster.
Upshifts and downshifts are executed only
when they will result in a plausible combination
of engine and vehicle speed; thus, for example,
a downshift that would cause the engine to
overrev will not be executed by the system. The
gear selected is briefly displayed in the instru-
ment cluster, followed by the gear actually in
use.

Shifting gears via shift paddles* on the

steering wheel

The shift paddles allow you to shift gears
quickly since both hands can remain on the
steering wheel.

ba8_E9091_cic.book Seite 56 Mittwoch, 29. Oktober 2008 2:59 14

Online Edition for Part no. 01 41 2 602 099 - © 10/08 BMW AG

Advertising