BMW M3 Sedan 2008 User Manual
Page 123
121
Turn signals, front
PY24W Silver Vision bulb, 24 watts
The turn signal bulb can be changed via a cover
in the wheel arch.
1.
Turn the respective wheel inwards.
2.
Using a coin, turn both locks of the cover all
the way to the left, arrows
1, and remove the
cover.
3.
Turn the bulb holder to the left, arrow
2, and
take it out.
4.
Turn the bulb socket in the bulb holder to
the right for removal and replacement.
5.
Insert the bulb holder and lock it by turning
it to the right.
6.
Attach the cover by positioning the bottom
edge first and then turning both locks all the
way to the right.
Tail lamps
>
Brake lamp in the luggage compartment lid:
H21W bulb, 21 watts
>
Other lamps:
P21W bulb, 21 watts
The tail lamps are divided in two parts. One part
is in the luggage compartment lid, the other is in
the fender.
1 Brake lamp
2 Roadside parking lamp/tail lamp
3 Turn signal
4 Backup lamp
5 Tail lamp
6 Brake lamp
Fender-mounted lamps
1.
Using a screwdriver, pry off the cover in the
cargo bay or release the turn-lock fastener
by turning it counterclockwise and remove
the cover.
2.
Loosen the bulb holder at the clip, see
arrow, and pull out.
3.
Apply gentle pressure to the bulb while
turning it to the left for removal and replace-
ment.
4.
Re-engage the bulb holder so that it audibly
clicks into place.
5.
Reattach the cover in the cargo bay.
Online Edition for Part no. 01 41 0 014 956 - © 02/08 BMW AG