BMW M6 Convertible 2008 User Manual

Page 229

Advertising
background image

M

o

bi

lity

227

Re

fe

re

n

c

e

At

a

g

la

n

c

e

Co

n

tr

o

ls

D

riv

in

g ti

ps

C

o

m

m

uni

ca

ti

o

n

s

Na

v

iga

ti

on

En

te

rt

a

in

m

e

n

t

Only use the tow fitting that comes with
the vehicle and screw it in as far as possi-

ble. Use the tow fitting for towing only on roads.
Avoid lateral loading of the tow fitting, e.g. do
not lift the vehicle by the tow fitting. Otherwise,
the tow fitting and vehicle can be damaged.

<

Access to screw thread

Front: press the arrow symbol on the cover in
the bumper.

Rear: press the arrow symbol on the cover while
prying out the cover upward by hand.

Being towed

Make sure that the ignition is switched on,
refer to page

59

; otherwise, the low-beam

headlamps, tail lights, turn signals and wind-
shield wipers would not be available. Do not tow
the vehicle with the rear axle raised, as other-
wise the steering can turn to the left or right.
When the engine is stopped, there is no power
assist. This then requires increased effort for
braking and steering.

<

Switch on the hazard warning flashers depend-
ing on the local regulations. If the electrical sys-
tem fails, mark the vehicle to be towed, e.g. with
a sign or warning triangle in the rear window.

Manual transmission

Gearshift lever in neutral position.

Sequential Manual Transmission with
Drivelogic

Make sure that selector lever position N is
engaged with the ignition switched on, as

otherwise the engine can be damaged during
towing.

<

Towing methods

Do not lift vehicle by tow fitting or body
and chassis parts; otherwise, damage

may result.

<

In some countries, towing with tow bars or
ropes in public traffic is not permitted. Familiar-
ize yourself with the regulations on towing in the
respective country.

With tow bar

The towing vehicle may not be lighter
than the vehicle to be towed; otherwise, it

will not be possible to reliably control vehicle
response.

<

The tow fittings used should be on the same
side on both vehicles. Should it prove impossi-
ble to avoid mounting the tow bar at an offset
angle, please note the following:

>

Clearance and maneuvering capability will
be strictly limited during cornering.

>

When mounted at an angle, the tow bar will
exert lateral forces, tending to push the
vehicle sideways.

Attach the tow bar to the tow fittings only,
as attachment to other vehicle parts can

lead to damage.

<

With tow rope

When starting off in the towing vehicle, make
sure that the tow rope is taut.

To avoid jerking and the associated
stresses on vehicle components when

towing, always use nylon ropes or nylon straps.
Attach tow ropes to the tow fittings only, as
attachment to other vehicle parts can lead to
damage.

<

Online Edition for Part no. 01 41 0 014 244 - © 08/07 BMW AG

Advertising
This manual is related to the following products: