Coolant, Adding, Engine oil – BMW Z4 Roadster 3.0si 2007 User Manual

Page 96: To adding engine oil

Advertising
background image

Under t

h

e

ho

od

94

Adding engine oil

Do not add the maximum amount of 1 US quart/
1 liter of engine oil until the warning lamp lights
up in the instrument cluster, refer to page

92

, or

until the oil level monitor shows "+1.0".

Add oil within the next 125 miles/200 km,
otherwise the engine could be dam-

aged.

<

Keep oils, greases, etc. out of the reach of
children and comply with the warnings on

the containers. Otherwise, health hazards may
result.

<

Oil change

Have your oil changed only by a BMW center or
a workshop that works according to BMW
requirements with the appropriately trained
personnel.

Approved engine oils

The quality of the engine oil is extremely impor-
tant for the function and life of an engine. BMW
continuously approves specific oils after con-
firming their suitability for use in its vehicles
with extensive testing.
Only use approved BMW High Performance
Synthetic Oil.
If BMW High Performance Synthetic Oil is not
available, you can add small quantities of other
synthetic oils in between oil changes. Only use
oils with the API SH specification or higher.

Your BMW center will be glad to answer
any questions regarding BMW High Per-

formance Synthetic Oil or other approved syn-
thetic oils.

<

You can also call BMW of North America at
1-800-831-1117 or visit the website
www.bmwusa.com to obtain this information.

Do not use any oil additives, as they could
cause engine damage under some cir-

cumstances.

<

Viscosity classes

Viscosity is a measure of an oil's flow rating and
is categorized in SAE classes.
Selecting the appropriate SAE class depends
on the regional climatic conditions in which you
normally drive your BMW.

Approved oils belong to the 5W-40 and
5W-30 classes.

<

These oils can be used for driving at all outside
temperatures.

Coolant

Warning lamp

The warning lamp lights up:
The coolant level is too low. Top up the
coolant as soon as possible.

Do not open the cooling system when the
engine is hot. If you do, escaping coolant

can cause burns.

<

Coolant consists of water and coolant additives.
Not all commercially available additives are suit-
able for your BMW. Your BMW center knows
which additives are appropriate.

Only use approved additives, otherwise
the engine could be damaged. The addi-

tives are hazardous to health.

<

Comply with the appropriate environ-
mental protection regulations when dis-

posing of coolant additives.

<

Checking the coolant level

1.

The engine must be at ambient tempera-
ture.

2.

Turn the cap of the expansion tank a little
counterclockwise to allow any accumulated

Online Edition for Part no. 01 41 0 013 320 - © 02/07 BMW AG

Advertising
This manual is related to the following products: