BMW Z4 Roadster 3.0si 2007 - Manual (Page 40)

Transporting child
ren safely
38
To gain access to this anchor fitting, lift the
plastic plug with the help of a screwdriver, see
arrow.
Use the tether strap anchor fittings only
to fasten child-restraint systems in place;
otherwise the anchor fittings could be dam-
aged.
<
Positioning the tether strap
1 Forward driving direction
2 Head restraint
3 Child restraint anchor fitting
4 Attaching clip
5 Cargo bay floor
6 Seat backrest
7 Tether strap
If necessary, fold up the anchor fitting up before
using.
1. Unhook the roller-blind cover, if necessary,
and let it retract.
2. Push the head restraint upward.
3. Guide the tether strap through the head
restraint support posts.
4. Push the head restraint into its lowest posi-
tion.
5. Clip the tether strap onto the anchor fitting.
M Sports seat*: positioning the tether
strap
1 Forward driving direction
2 Support posts
3 Head restraint
4 Child restraint anchor fitting
5 Attaching clip
6 Cargo bay floor
7 Seat backrest
8 Tether strap
If necessary, fold up the anchor fitting up before
using.
1. Unhook the roller-blind cover, if necessary,
and let it retract.
2. Guide the tether strap through the head
restraint support posts.
3. Clip the tether strap onto the anchor fitting.
LATCH child-restraint fixing system*
LATCH: Lower Anchor and Tethers for CHil-
dren.
When installing a LATCH child seat, com-
ply with the child seat manufacturer's
operating and safety instructions. <
Online Edition for Part no. 01 41 0 013 320 - © 02/07 BMW AG