BMW Z4 Roadster 3.0si 2007 - Manual (Page 102)

Replacing components
100
55-watt bulb, H7
The H7 bulb is pressurized. Therefore,
wear safety glasses and protective
gloves. Otherwise there is a risk of injury if the
bulb is damaged.
<
1. Turn the bulb socket counterclockwise and
take it out.
2. Remove and replace the bulb.
3. Insert bulb socket.
Side marker lamps, front
5-watt bulb, W5W
1. Take out bulb socket.
2. Remove and replace the bulb.
3. Insert bulb socket.
Front turn signal indicators
21-watt bulb, H21
1. Insert a Phillips-head screwdriver from the
onboard tool kit into the appropriate open-
ing, arrows
1.
2. Turn the Phillips-head screwdriver to the
left, arrows
2.
3. Use the Phillips-head screwdriver to take
the bulb socket out.
4. Remove and replace the bulb.
5. Insert bulb socket.
Side turn signal indicators
5-watt bulb, WY5W
1. Turn the lamp to the left and remove.
2. Apply gentle pressure to the bulb socket
while turning it to the left and remove it.
3. Remove and replace the bulb.
4. Insert bulb socket.
5. Insert the lamp.
Online Edition for Part no. 01 41 0 013 320 - © 02/07 BMW AG