Telep h oning – BMW 525xi Sedan 2006 User Manual

Page 186

Advertising
background image

Telep

h

oning

184

Example: dialing phone numbers

Start the dialog:
Press the

button on the steering wheel.

Adjusting volume

You can adjust the volume for the instructions
from the system:

Turn the button during an instruction to select
the desired volume.
This volume for the instructions is maintained,
even if the other audio sources are set to mini-
mum volume.
The setting is stored for the remote control cur-
rently in use.

Calling

Dialing phone numbers

Correcting phone number

After the last spoken sequence of digits has
been repeated by the system, you can delete
this sequence of digits.

The command

{Correct number} can be

repeated as often as you like.

Deleting input

{Delete} is used to delete all the digits entered
so far.

Voice phone book

Operating by voice command requires a per-
sonal voice phone book.

>

On vehicles with combined drives for audio
CDs and navigation DVDs, the entries are
automatically adopted from your mobile
phone's memory.

>

On vehicles with a single drive, the entries
must be entered by voice and are indepen-
dent of your mobile phone's memory. In this
case, it is not possible to use voice com-
mand either to call phone numbers stored in
the mobile phone or to store new numbers.

Command

Response

{Dial number}

{{Please say the number}}

e.g.

{123 456 7890}

Depending on equipment:
{{123 456 7890. Continue?}} or

{{123 456 7890. And next?}}

{Dial}

{{Dialing number}}

1.

{Dial number}.
The dialog for establishing a telephone
connection is opened.

2.

Say the phone number.
For telephone calls abroad, say

{Plus}

and then the country code.

3.

{Dial}.
The connection to the desired sub-
scriber is established.

{Correct number}.
The digits are deleted.

Online Edition for Part No. 01 41 0 012 211 - © 02/06 BMW AG

Advertising