Driving – BMW 525xi Sedan 2006 User Manual

Page 72

Advertising
background image

Driving

70

Use good judgment to select the appro-
priate following distance given road con-

ditions, traffic, applicable laws and driving rec-
ommendations for a safe following distance.

<

Deactivate system

Press the lever up or down. The displays in the
instrument cluster disappear.
You also deactivate the system when you
brake, shift very slowly or into neutral, or
engage the selector lever position N. In addi-
tion, the system is deactivated automatically:

>

When you activate DTC Dynamic Traction
Control

>

When you deactivate DSC Dynamic Stabil-
ity Control

>

When the system does not recognize any
objects for a longer time, e.g. on infre-
quently traveled roads without a shoulder or
guard rails, or if the radar sensor is covered
with dirt, refer to page

71

>

When the speed is reduced to below
20 mph/30 km/h due to a traffic situation

The system deactivates automatically
when the speed is set to below 20 mph/

30 km/h. A signal sounds and a message
appears on the Control Display. The active

intervention of the driver is required, otherwise
accidents can occur.

<

Resume stored desired speed and
distance

Press button

4.

The displays appear in the instrument cluster.
When you switch off the ignition, the stored
desired speed is deleted.

Displays in instrument cluster

1 Stored desired speed
2 Lights up yellow: vehicle driving ahead is

detected
Flashes red, a signal sounds: the system
cannot establish the distance, apply the
brakes yourself
Flashes yellow: driving stability control sys-
tems intervene, the active cruise control is
deactivated

3 Selected distance to vehicle driving ahead:

lights up as soon as the system is activated

4 Selected desired speed appears briefly

If the display ACC --- mph/km/h briefly
appears in the instrument cluster, it might

be that conditions necessary for operation are
not currently being met. To call up Check Con-
trol messages, refer to page

79

.

<

Distance 3
This distance is set when the sys-
tem is used for the first time after
starting the engine.

Distance 4

Online Edition for Part No. 01 41 0 012 211 - © 02/06 BMW AG

Advertising