Starting engine – BMW 525xi Sedan 2006 User Manual

Page 61

Advertising
background image

Co

n

tr

o

ls

59

Re

fe

re

n

c

e

At

a

g

la

n

c

e

D

riv

in

g ti

ps

C

o

m

m

uni

ca

ti

o

n

s

Na

v

iga

ti

on

En

te

rt

a

in

m

e

n

t

M

o

bi

lity

Starting engine

Do not run the engine in closed rooms,
otherwise the inhaling of toxic exhaust

gases can cause unconsciousness and death.
The exhaust gases contain carbon monoxide,
an odorless and colorless, but highly toxic gas.
Never leave an unattended vehicle with the
engine running, as such a vehicle represents a
potential safety hazard.
Before leaving the vehicle with the engine run-
ning, set the selector lever to the idling or the
P position and set the handbrake, otherwise the
vehicle can begin to roll.

<

When starting the engine, do not press the
accelerator pedal.
Do not allow the engine to warm up by leaving it
running while the vehicle remains stationary.
Instead, begin to drive immediately at a moder-
ate engine speed.

Do not press either the brake or the clutch
pedal as long as you do not want to start

the engine. The engine starts immediately
when you briefly press the Start/Stop button
and press the brake pedal with an automatic
transmission

*

or the clutch pedal with a manual

transmission.

<

Manual transmission

1.

Apply the handbrake.

2.

Depress the clutch pedal and select the
idling position.

3.

Briefly press Start/Stop button.

The system responds by automatically engag-
ing the starter for a certain period and automat-
ically disengaging it as soon as the engine
starts.

Automatic transmission*

1.

Depress brake pedal.

2.

Place selector lever in position P or N.

3.

Briefly press Start/Stop button.

The system responds by automatically engag-
ing the starter for a certain period and automat-
ically disengaging it as soon as the engine
starts.

SMG Sequential Manual
Transmission*

1.

Depress brake pedal.

2.

Engage selector lever position N and make
sure that this position is also indicated in
instrument cluster.

3.

Briefly press Start/Stop button.

The system responds by automatically engag-
ing the starter for a certain period and automat-
ically disengaging it as soon as the engine
starts.

If the engine fails to start, depress the
brake pedal and press the selector lever

to the right then engage the position N. Watch
the display in the instrument cluster while doing
so.

<

Special starting conditions

Depress the accelerator pedal half way when
starting the engine in the following situations:

>

The engine fails to start on the first attempt,
e.g. if it is very hot or cold.

>

The engine is started at very low tempera-
tures, below approx. +5

7/–156, at high

altitudes, over approx. 3,300 ft/1,000 m.

Avoid frequent starting in quick succes-
sion or repeated starting attempts in

which the engine does not start. Otherwise, the
fuel is not burned or inadequately burned and
there is a danger of overheating and damaging
the catalytic converter.

<

Online Edition for Part No. 01 41 0 012 211 - © 02/06 BMW AG

Advertising