BMW 750i Sedan 2006 - Manual (Page 156)

On/off and s
e
tt
ings
154
2. Turn the controller until you reach the
desired setting.
3. Press the controller to save the setting.
Balance and fader
1. Select "Balance" or "Fader" and press the
controller.
2. Turn the controller until you reach the
desired setting.
3. Press the controller to save the setting.
Speed-dependent volume control
The speed-dependent volume control auto-
matically increases the volume as the speed
increases. You can set various stages for the
volume increase.
1. Select "Speed Vol." and press the control-
ler.
2. Turn the controller until you reach the
desired setting.
3. Press the controller to save the setting.
LOGIC7*
sets the spatial sound effect between the val-
ues 0 and 10. The best possible spatial sound
lies at the values 5 and 6. At 0, the spatial sound
effect is switched off. This setting is suitable for
radio plays, for example.
1. Select "LOGIC7" and press the controller.
2. Turn the controller until you reach the
desired setting.
3. Press the controller to save the setting.
LOGIC7 and the LOGIC7 logo are regis-
tered trade marks of Lexicon, Inc., a com-
pany of the Harman International Group. <
Equalizer
You can adjust individual audio frequency
ranges.
1. Select the symbol and press the con-
troller.
2. Turn the controller to the left or right to
select the desired frequency range and
then press the controller.
3. Turn the controller until you reach the
desired setting.
4. Press the controller to save the setting.
Resetting tone settings
You can reset all tone settings except "Speed
Vol." to the standard default settings.
Select "RESET" and press the controller.
Online Edition for Part No. 01 41 0 012 254 - © 02/06 BMW AG