BMW 750i Sedan 2006 - Manual (Page 162)

Ra
di
o
160
4. Select "Channels" and press the controller.
The channels that can be received are
shown in the list.
5. Select channel and press the controller.
A phone number and the electronic serial
number, ESN, are displayed.
The electronic serial number is
required to enable or disable.
<
6. Dial the displayed telephone number to
have the channel enabled or disabled.
During the enabling or disabling process,
leave the ignition switched on.
These channels are enabled.
Channel selection
Using buttons in center console
Press the button for the corresponding
direction until you reach the next station.
Using the voice command system:
Using iDrive
1. Select "SAT" and press the controller.
2. Choose the selection criterion and press
the controller.
> "Channels":
All channels are displayed.
> "Categories":
All channels are displayed, sorted
according to categories.
> "Presets":
Up to twelve channels that you have pre-
viously stored are displayed.
3. Select channel and press the controller.
Using the voice command system:
Select a stored channel:
Displaying additional information
Select the channel currently being played and
press the controller.
The name of the station, the name of the artist,
and the title of the track are displayed.
Notes
If no signal can be received for more than 4 sec-
onds, a message is displayed on the Control
Display.
Reception may not be possible for certain
reasons, e.g. environmental influences or
topographical conditions. The satellite radio
has no influence on this.
The signal may not be available in tunnels or
underground garages, next to tall buildings,
1. {Satellite Radio} or {SDARS}.
2. {Previous station} or {Next station}
{Satellite Radio} or {SDARS}.
> {Previous station} or {Next station}
> {Previous} or {Next}.
1. {Satellite Radio} or {SDARS}.
2. {Station 1...12}.
Online Edition for Part No. 01 41 0 012 254 - © 02/06 BMW AG