BMW Z4 Roadster 2.5i 2005 - Manual (Page 26)

Opening and closing
24
5. Grab the convertible top at its frame and pull
it up to the windshield frame
6. Pull out the cover panel that is in the center
of the front convertible top frame
7. Insert the Allen wrench into the hex slot.
The Allen wrench is located in the vehicle
tool pouch, refer to page
91
8. Pull the convertible top frame down as far as
possible
9. Continue turning the Allen wrench to the
left until the convertible top frame has
locked onto the windshield frame.
Wind deflector*
With the convertible top open, the wind deflec-
tor keeps air movement in the passenger com-
partment to a minimum, thus providing you with
a pleasant drive, even at higher speeds.
Installation
Insert the wind deflector in its proper orienta-
tion into the guides
1 provided on the rollover
bars.
Refer to the labeling on the wind deflector to
determine its proper orientation.
The wind deflector must engage firmly, as
it could otherwise become detached at
higher vehicle speeds. <
The wind deflector panels 2 in the rollover bars
cannot be removed.
Removal
Slide both locks inward and remove the wind
deflector.
Online Edition for Part-No. 01 41 0 158 704 - © 10/04 BMW AG