Opening and closing – BMW Z4 Roadster 2.5i 2005 User Manual

Page 28

Advertising
background image

Opening and closing

26

Stopping the alarm

>

Unlock the vehicle with the remote control,
refer to page

16

>

or turn the ignition key to position 1, refer to
page

36

.

Indicator lamp displays

>

The indicator lamp beneath the interior mir-
ror flashes continuously:
The system is armed

>

The indicator lamp flashes immediately
after the vehicle is locked:
Doors or luggage compartment lid are not
completely closed. Even if you do not close
the area causing the alert, the remaining
areas are secured and the indicator lamp
flashes continuously after 10 seconds.
However, the interior motion sensor is not
activated

>

If the indicator lamp goes out immediately
after the vehicle is unlocked:
No manipulation or attempted intrusions
have been detected in the period since the
system was armed

>

If the indicator lamp flashes for 10 seconds
immediately after the vehicle is unlocked:
An attempted entry has been detected in
the period since the system was armed.

After an alarm has been triggered, the indicator
lamp will flash continuously.

Tilt alarm sensor and interior motion
sensor

Tilt alarm sensor

The inclination of the vehicle is monitored. The
alarm system reacts, e.g. to attempts to steal
the wheels or tow the vehicle.

Interior motion sensor*

The system monitors the footwells and the
seating areas of the driver and passenger. Even
when the convertible top is open, the alarm sys-
tem including the interior motion sensor is
armed. Objects falling into the vehicle, e.g.
leaves, can trigger unintentional alarms, refer to
Avoiding unintentional alarms.

Avoiding unintentional alarms

The tilt alarm sensor and interior motion sensor
can be deactivated at the same time. In this way
you can avoid unintentional alarms, e.g. in the
following situations:

>

In duplex garages

>

When the vehicle is being transported on a
car-carrying train

>

If animals are to be left in the vehicle.

To deactivate the tilt alarm and interior
motion sensors

Press the

button on the remote control

a second time immediately after locking.
The indicator lamp lights up briefly and then
flashes continuously. The tilt alarm sensor and
the interior motion sensor are deactivated until
the vehicle is again unlocked and locked.

Online Edition for Part-No. 01 41 0 158 704 - © 10/04 BMW AG

Advertising