Adapting teleservice or bmw assist, Teleservice, bmw assist – BMW 645Ci Coupe 2004 User Manual
Page 160
TeleService, BMW Assist
158
Adapting TeleService or
BMW Assist
Displaying and updating services
You will be informed about the changes in
the scope of TeleService or BMW Assist. In
this case, you should update the services.
Control Center, for principle details, refer to
page
:
1.
Open the start menu
2.
Press the controller to open the menu
3.
Select "Communication interface" and
press the controller
4.
Select "BMW Service settings" and
press the controller
5.
Select "Service Status" and press the
controller.
You will be informed about the current
scope of TeleService or BMW Assist.
These services are enabled
6.
Select "Update services" and press the
controller.
Roaming
So that you are able to use the services of
TeleService or BMW Assist in other coun-
tries, the foreign providers must support
them.
In addition, the services offered must be
transmitted to your vehicle. You can do this
in the following ways:
>
Update services
>
Enable roaming.
The range of foreign services is trans-
ferred automatically. This can involve
additional costs.
To enable roaming:
1.
Open the start menu
2.
Press the controller to open the menu
3.
Select "Communication interface" and
press the controller
4.
Select "BMW Service settings" and
press the controller
5.
Select "Profile" and press the controller
6.
Select "Roaming" and press the con-
troller.
Roaming is enabled.
Terminating services
If you terminate the services, your vehicle
will not be equipped to contact the BMW
Assist call center. When an emergency call
is initiated, the telephone connection to the
general emergency number is established.
Control Center, for principle details, refer to
page
1.
Open the start menu
2.
Press the controller to open the menu
3.
Select "Communication interface" and
press the controller
4.
Select "BMW Service settings" and
press the controller
5.
Select "Service Status" and press the
controller
6.
Select "Terminate services" and press
the controller.
Use of TeleService or BMW Assist is
blocked. To lift the block, re-enabling is
required, refer to page
not affect the contractual agreements.
Automatic service notification can be dis-
abled separately. Contact your BMW cen-
ter for assistance.
Enable TeleService and, if applicable,
BMW Assist once again to re-establish.
Online Edition for Part No. 01 41 0 157 980 - © 01/04 BMW AG