Replacing components – BMW 645Ci Coupe 2004 User Manual

Page 182

Advertising
background image

Replacing components

180

4.

Turn the bulb holder to the left and pull
out

5.

Remove and replace the bulb.

Sidemarker

Bulb 5 watts, WY5W ST

The bulb can be replaced via a cover at the
front of the wheel well, refer to the descrip-
tion for turn signal lamp 2.

1.

The bulb holder of the sidemarker lamp
is located toward the outside of the
vehicle next to the bulb holder of turn
signal lamp 2

2.

Turn the bulb holder to the left and pull
out

3.

Remove and replace the bulb.

Side turn signals

Bulb 5 watts, WY 5 W

1.

Press against the front edge of the lamp
with the tip of your finger, then push it to
the rear, release the detent at the front
and take it off the trim strip

2.

Turn the bulb holder 90 5 to the left and
remove

3.

Remove and replace the bulb.

Tail lamps

The roadside parking, rear and brake
lamps are LEDs. The backup lamps

are fitted with longlife bulbs. Please con-
tact a BMW center in case of a malfunc-
tion.

<

1

Turn signal

2

Roadside parking, rear and brake lamp

3

Backup lamp

4

Reflector

Rear turn signals

Bulb 21 watts, PY 21 W

The illustration shows the recess on the left
side of the luggage compartment.

1.

Remove the cover

2.

Unclip the bulb holder and remove

3.

Apply gentle pressure to the bulb while
turning it to the left for removal and
replacement.

License plate lamps

Bulb 5 watts, WY 5 W

Online Edition for Part No. 01 41 0 157 980 - © 01/04 BMW AG

Advertising
This manual is related to the following products: