Windows – BMW 645Ci Coupe 2004 User Manual

Page 35

Advertising
background image

Controls

33

Reference

At a glance

Driving tips

Communications

Navigation

Entertainment

Mobility

Indicator lamp displays

>

The indicator lamp below the interior
rearview mirror flashes continuously:
the system is armed

>

The indicator lamp flashes on locking:
door(s) or luggage compartment lid are
not completely closed. Even if you do
not close the alerted area, the system
begins to monitor the remaining areas,
and the indicator lamp flashes continu-
ously after approx.10 seconds. How-
ever, the interior motion sensor is not
activated

>

The indicator lamp goes out on unlock-
ing: no manipulation or attempted intru-
sions have been detected in the period
since the system was armed

>

The indicator lamp flashes on unlocking
before the remote control is inserted in
the ignition lock, but for no more than
roughly 5 minutes: an attempted entry
has been detected in the period since
the system was armed.

Following triggering of an alarm, the indica-
tor lamp will flash continuously.

Tilt alarm sensor and interior motion
sensor

Tilt alarm sensor

Monitors the inclination of the vehicle. The
alarm system reacts, for example, if some-
one attempts to steal the wheels or tow the
vehicle.

Interior motion sensor

Coupe:
In order for the interior motion sensor to
function properly, the windows and glass
roof must be completely closed.

Convertible:
Monitors the interior up to the height of the
seat cushions. This means that the alarm
system, including the interior motion sen-
sor, is armed even if the convertible top is
open. Falling objects, e.g. leaves, can trig-
ger false alarms, refer to Avoiding uninten-
tional alarms.

Avoiding unintentional alarms

The tilt alarm sensor and interior motion
sensor may be switched off at the same
time. This is how you prevent unintentional
alarms, e.g. in the following situations:

>

In garages with elevator ramps

>

During transport on automobile trans-
port trains

>

If animals are to remain in the vehicle.

Switching off tilt alarm sensor and
interior motion sensor

Press the

button on the remote con-

trol once again directly after locking.

The indicator lamp lights up briefly and
then flashes continuously. The tilt alarm
sensor and the interior motion sensor are
switched off until the vehicle is unlocked
and locked again.

Windows

To prevent injuries, exercise care
when closing the windows and keep

them in your field of vision until they are
shut.
When leaving the vehicle, always remove
the ignition key and close the doors to pre-
vent children from operating the windows
and injuring themselves etc.

<

Online Edition for Part No. 01 41 0 157 980 - © 01/04 BMW AG

Advertising
This manual is related to the following products: