Changing a wheel – BMW X3 3.0i SAV 2004 User Manual

Page 105

Advertising
background image

Reference

At a glance

Controls

Driving tips

Mobility

103

Tailgate lamp

5 Watt bulb

1.

Pull off the bulb holder

2.

Replace the bulb.

Light-emitting diodes LEDs

Light-emitting diodes installed behind
translucent lenses serve as the light source
for many of the controls and displays in
your vehicle. These light-emitting diodes,
which operate using a concept similar to
that applied in conventional lasers, are offi-
cially designated as Class 1 light-emitting
diodes.

Do not remove the covers, and never
stare into the unfiltered light for sev-

eral hours, as irritation of the retina could
result.

<

Changing a wheel

Safety precautions to observe in the
event of a flat tire and during all tire

changes:
Park the vehicle as far as possible from
passing traffic. Park on a firm, flat, surface.
Switch on the hazard warning flashers.
Lock the steering wheel in straight-ahead
setting of the wheels. Set the handbrake
and engage first gear, reverse gear or
selector-lever position P.
All passengers should be outside the vehi-
cle and well away from your immediate
working area, behind a guardrail, for
instance.
If a warning triangle or portable hazard
warning lamp is required, set it up on the
roadside at an appropriate distance from
the rear of the vehicle. Comply with all

safety guidelines and regulations.
Change the wheel only on a level, firm sur-
face which is not slippery. The vehicle or
the jack could slip to the side if you attempt
to raise the vehicle on a soft or slippery sur-
face such as snow, ice, tiles, etc.
Position the jack on a firm support surface.
Do not use a wooden block or similar
object as a support base for the jack, as
this would prevent it from extending to its
full support height and reduce its load-car-
rying capacity.
To avoid serious or fatal injury: never lie
under the vehicle, and never start the
engine while it is supported by the jack.

<

What you will need

Open tailgate and raise or remove floor
cover, refer to page

72

.

1

Vehicle jack

2

Chock

3

Lug wrench

In order to avoid rattling noises later, note
the position of the tools when you remove
them and return them to their original posi-
tion when you are through using them.

Compact wheel

The compact wheel is located under the
cargo area on the floor of the vehicle.

Online Edition for Part No. 01 41 0 157 631 - © 07/03 BMW AG

Advertising
This manual is related to the following products: