Replacing components – BMW X3 3.0i SAV 2004 User Manual

Page 104

Advertising
background image

Replacing components

102

Front fog lamps

H11 bulb, 55 Watts

Always wear gloves and eye protec-
tion – the atmosphere within the bulb

is pressurized. Failure to observe this pre-
caution can lead to personal injury should
the bulb be damaged.

<

1.

Pull the cover in front of the fog lamp
forward

2.

Loosen the screws, refer to arrow, and
pull out the headlamp

3.

Turn the lamp base at the back of the
headlamp to the left and remove it

4.

Replace the bulb.

Tail lamps

21 Watt bulb

1

Turn signal indicator

2

Backup lamps

3

Rear lamp

4

Rear lamp/brake lamp

Replacing tail lamps

1.

Open the flap in the side panel, refer to
page

72

2.

Lift the side panel if necessary

3.

To release the plug-in connection of the
cable, press the spring, refer to arrow 1

4.

To remove the back panel of the lamp,
release the retainer, refer to arrow 2

5.

Apply gentle pressure to the bulb fitting
while turning it to the left for removal
and replacement

6.

Install in the opposite order.

Lamps in the tailgate are defective:
Please contact your BMW Sports Activity
Vehicle Center.

License plate lamp

10 Watt bulb

1.

Press the lamp out to the side with a
screwdriver

2.

Remove the lamp and replace the bulb.

Online Edition for Part No. 01 41 0 157 631 - © 07/03 BMW AG

Advertising
This manual is related to the following products: