Cruise control – BMW X3 3.0i SAV 2004 User Manual

Page 45

Advertising
background image

Reference

At a glance

Controls

Driving tips

Mobility

43

matically heated as of ignition key
position 2.

Cleaning headlamps*

When the vehicle lighting system is
switched on, the headlamps are cleaned at
regular and appropriate intervals.

Rear window wiper

Rear window wiper in intermittent mode.
When reverse gear is engaged, the wiper
operates continuously.

You can also program the interval:

1.

Briefly move the wiper lever from posi-
tion 0 to position 2

2.

Wait for desired interval; maximum of
30 seconds

3.

Move the wiper lever from position 0 to
position 2 again

To change the wiper blades, refer to
page 99.

Cruise control*

The vehicle maintains and stores the speed
that you set as of a speed of approx.
20 mph/30 km/h.

You can use cruise control whenever the
system is active while the engine is run-
ning.

Indicator lamp

Indicator lamp in the instrument
cluster lights up green:
System ready for operation using

the buttons in the steering wheel.

Activating the system

From ignition key position 2:
Press button in steering wheel; the indica-
tor lamp in the instrument cluster comes
on. You are able to use the cruise control.

Do not use the cruise control when
driving on winding roads, in heavy

traffic or in poor road conditions – e.g.

snow, rain, ice, loose road surface – that do
not permit a constant speed.

<

Deactivating system

Press the button repeatedly until the indi-
cator lamp in the instrument cluster goes
out.
The cruise control is also deactivated when
the ignition key is turned to position 0. The
speed stored in the memory is deleted in
the process.

Maintaining and storing speed or
accelerating

Briefly press button

+

:

The system maintains and stores the cur-
rent vehicle speed. Every time you briefly
press the button, the vehicle's speed
increases by roughly 1–mph/1 km/h.

Press and hold button

+

:

The vehicle accelerates without pressure
on the accelerator pedal. When you release
the button, the system maintains and
stores the current speed.

If, on a downhill gradient, the engine's
braking effect is not sufficient, the

controlled speed can be exceeded. Speed
can drop on uphill grades if the engine out-
put is insufficient.

<

Decelerating

Briefly press button

:

Every time you briefly press the button,
the vehicle's speed decreases by roughly
1 mph/1 km/h if you are already driving
with cruise control.

Press and hold button

:

With the cruise control active, the system
automatically reduces the throttle opening
to slow the vehicle. When you release the
button, the system maintains and stores
the current speed.

Online Edition for Part No. 01 41 0 157 631 - © 07/03 BMW AG

Advertising
This manual is related to the following products: