BMW X3 3.0i SAV 2004 - Manual (Page 49)

Reference
At a glance
Controls
Driving tips
Mobility
47
Setting the time
As of ignition key position 1:
Hours
1. Hold button 2 pressed for a few sec-
onds until the hours are displayed and
the colon flashes
2. Press button 1 repeatedly until the
desired hour is set
Minutes
3. Press button 2 to change to the minute
display
4. Press button 1 repeatedly until the
desired minutes are set
5. Press button 2 to confirm the time.
The set time is transferred to the display of
the radio or displayed in the instrument
cluster.
Display mode
Ignition key in position 0 or removed:
Press button 1.
The time and display of the miles/kilome-
ters appear for a few seconds.
Computer*
Mode selection
As of ignition key position 1, you can call
up information from the computer using the
button in the turn signal indicator lever. By
pressing the button briefly in the direction
of the steering column, you can call up a
new function for display.
The displays appear in the following order:
Time, outside temperature, average fuel
consumption, cruising range, average
speed.
As of ignition key position 1, the last active
setting is displayed.
If you desire, you can display the fol-
lowing functions in a different unit.
<
Outside temperature
Changing the unit of measure 7/6
During the display, hold down the button in
the turn indicator lever until the display
changes.
Ice warning
If the outside temperature falls below
approx. +37.5 7 /+36, the computer
switches automatically to the outside tem-
Online Edition for Part No. 01 41 0 157 631 - © 07/03 BMW AG