Brake force display, Airbags, Technology for comfort, convenience and safety – BMW X3 3.0i SAV 2004 User Manual

Page 56

Advertising
background image

Technology for comfort, convenience and safety

54

Brake force display

The brake force display indicates the inten-
sity with which you are applying your
brakes to drivers of following vehicles.

The display consists of two stages:

>

Normal braking:
Brake lamp 1 lights up on both sides of
the vehicle together with the center
brake lamp

>

Heavy braking and braking with ABS:
Brake lamps 1 and 2 light up on both
vehicle sides together with the center
brake lamp.

Airbags

The following airbags are located beneath
the marked covers:

1

Front airbags for driver and front pas-
senger

2

Head airbags in front and rear

3

Side airbags in front and rear

*

Protective effect

The front airbags help protect the driver
and front passenger by responding to fron-
tal impacts in which safety belts alone can-

not provide adequate restraint. When
needed, the head and side airbags help
provide protection in the event of side
impact. The relevant side airbag supports
the side upper body area. The relevant
head airbag supports the head and pro-
vides protection against objects entering
the vehicle.

The airbags are deliberately not triggered
in every impact situation, e.g. less severe
accidents, certain roll-over situations or
rear-end collisions.

The rear seat side airbags may
already have been deactivated by a

BMW Sports Activity Vehicle Center.
Labels in the rear door opening should indi-
cate the status of your rear seat side air-
bags. If you are uncertain of their status, or
wish to have the airbags activated or deac-
tivated, please contact your BMW Sports
Activity Vehicle Center.

<

For information on the correct sitting posi-
tion, refer to page

27

.

Do not apply adhesive materials to
the cover panels of the airbags, cover

them or modify them in any other way.
Do not attempt to remove the airbag reten-
tion system from the vehicle. Never modify
or tamper with either the wiring or the indi-
vidual components in the airbag system.
This category includes the upholstery in the
center of the steering wheel, on the instru-
ment cluster, the side trim panels on the
doors, and the roof pillars along with the
sides of the headliner. Do not attempt to
remove or dismantle the steering wheel.
Do not touch the individual components
directly after the system has been trig-
gered, because there is a danger of burns.
If you note any indication of system mal-
function, if you desire to have an airbag
deactivated, or if the airbag retention sys-
tem is triggered in response to an accident,
you should always entrust all inspection,
repair and dismantling operations to your
BMW Sports Activity Vehicle Center.
Unprofessional attempts to service the sys-
tem could lead to failure in an emergency
or undesired airbag activation, either of
which could result in personal injury.

Online Edition for Part No. 01 41 0 157 631 - © 07/03 BMW AG

Advertising
This manual is related to the following products: