BMW X5 4.8is SAV 2004 - Manual (Page 146)

144 n Wheel/tire condition Replacing wheels/tires
Tire tread
The tread depth should not fall below
e
in/3 mm.
At tread depths below e in/3 mm there
is an increased risk of high-speed
hydroplaning, even when only small
amounts of water are present on the
road surface.
As winter tires display a noticeable loss
in their ability to cope with cold-
weather driving conditions once the
tread wears to below k/K in/4 mm, to
ensure continued safety you should
always have such tires replaced.
Wear indicators at the tread-groove
base, arrow, are distributed over the
tire's circumference and are marked on
the side of the tire with TWI – Tread
Wear Indicator. These indicators signal
at a tread depth of k/FK in/1.6 mm that
the legally permitted wear limit has
been reached.
390de331
Unprofessional attempts by lay-
men to service tires can lead to
damage and accidents.
Have this work performed by skilled
professionals only. The technicians at
your BMW Sports Activity Vehicle cen-
ter will be glad to assist you with the
required professional knowledge and
specialized equipment.
<
The correct wheel and tire combination
also affects various systems whose
function would otherwise be impaired,
e.g. ABS, DSC, xDrive.
Have the wheel and tire assemblies bal-
anced every time either a wheel or a tire
is replaced.
BMW does not recommend the
use of retread tires, as otherwise
driving safety may be reduced. Possible
variations in the design and the age –
which could be substantial – of the car-
casses can lead to unusually rapid
wear.
<
Online Edition for Part No. 01 41 0 158 286 - © 04/04 BMW AG