Towing and tow-starting vehicle – BMW X5 4.8is SAV 2004 User Manual
Page 177
175
n
Overview
Controls
Maintenance
Repairs
Data
Index
Towing and tow-starting vehicle
Tow-starting
Do not tow-start vehicles with an
automatic transmission.
For information on jump-starting, refer
to page
.
<
Only tow-start vehicles with a catalytic
converter with the engine cold. It is bet-
ter to jump-start the engine, refer to
page
1. Switch on the hazard warning flash-
ers and observe local regulations
2. Turn the ignition key to position 2
3. Engage the 3rd gear
4. Tow-start with the clutch pedal com-
pletely depressed and slowly release
the clutch pedal. After the engine
starts, immediately depress the
clutch pedal completely again
5. Stop at a suitable location, remove
the tow bar or rope and switch off
the hazard warning flashers
6. Have the vehicle checked.
Do not activate the HDC Hill
Descent Control during tow-
.
<
Online Edition for Part No. 01 41 0 158 286 - © 04/04 BMW AG