Automatic power deploy, Automatic power stow, Manual power deploy – FORD 2014 Expedition v.3 User Manual

Page 227: Enable and disable, Bounce-back, 226 load carrying

Advertising
background image

The running boards automatically
move when the doors are opened
to assist entering and exiting the
vehicle.

Automatic Power Deploy

The running boards will extend down and out when the doors are opened.

Automatic Power Stow

The running boards will return to the stowed position after a two second
delay when the doors are closed.

Manual Power Deploy

To manually operate the running boards, refer to the Information
Displays
chapter.
• This feature can manually set the running boards in the deployed

(OUT) position for access to the roof.

• When running boards are manually set in the deployed position, they

will return to the stowed position and enter automatic mode when the
vehicle speed exceeds 5 mph (8 km/h).

Enable and Disable

To enable and disable the power running board feature, refer to the
Information Displays chapter.
• When this feature is disabled (OFF), the running boards will move to

the stowed position regardless of the position of the doors.

• When this feature is enabled (AUTO), the running boards will move

back to the correct positions based off of the door positions.

Bounce-Back

If an object is in the way of the moving running board, it will reverse
direction and move to the end of travel.

226

Load Carrying

2014 Expedition (exd)
Owners Guide gf, 3rd Printing, March 2014
USA
(fus)

Advertising