Detection, Understanding radar and laser, Vg-2 – Cobra Electronics ESD 9290 User Manual

Page 10: Safety alert traffic warning system

Advertising
background image

English

14

Detection

Your Detector

Intro

Operation

Customer

Assistance

Warranty

Notice

Main Icons

Secondary Icons

Nothing Comes Close to a Cobra

®

15

Understanding Radar and Laser

Your Detector

Intro

Operation

Customer

Assistance

Warranty

Notice

Main Icons

Secondary Icons

Description

Interpretation

Recommended

Response

Tone repeats slowly at first,

then speeds up rapidly.

Probably police radar.

FULL ALERT

Tone sounds one time only.

Probably a false alarm,

but possibly pulsed radar

or VG-2 nearby.

Exercise caution

Tone instantly begins

repeating rapidly.

Radar or VG-2 nearby has

been activated suddenly.

FULL ALERT

Tone repeats slowly as you

approach a hill or bridge,

then speeds up sharply as

you reach it.

Probably police radar

beyond the hill or bridge.

FULL ALERT

Tone repeats slowly for a

short period.

Probably a false alarm.

Exercise caution

Any type of laser alert.

Laser alerts are never

false alarms.

FULL ALERT

A Safety or Strobe Alert.

You are nearing an

emergency vehicle.

Exercise caution

Responding to Alerts

Understanding Radar and Laser

Radar Speed Monitoring Systems

Three band frequencies have been approved by the Federal Communications

Commission (FCC) for use by speed monitoring radar equipment:

X band

10.525 GHz

K band

24.150 GHz

Ka band 33.400 – 36.00 GHz

Your detector detects signals in all three radar bands, plus Ku band (13.435 GHz),

which is an approved frequency used in parts of Europe and Asia.

VG-2

VG-2 is a “detector detector” that works by detecting low-level signals emitted

by most radar detectors. Your detector does not emit signals that can be detected by

VG-2, but does detect VG-2 signals and will alert you when a device is in use near

your vehicle.

Safety Alert Traffic Warning System

FCC-approved

Safety Alert transmitters emit microwave radar signals that

indicate the presence of an emergency vehicle.
Because these microwave signals are within the K band frequency, most

conventional radar detectors will detect Safety Alert signals as standard

K band radar. Your detector, however, is designed to differentiate between standard

K band and Safety Alert signals, and give separate alerts for each.
Safety Alert technology is relatively new. Safety Alert transmitters can be found in

limited numbers in all 50 states, but the number is growing. Depending on your

location, you may not receive these alerts regularly and may often encounter

emergency vehicles without being alerted. As the number of transmitters increases,

these alerts will become more common.
When you receive such an alert, please watch for emergency vehicles ahead of

you, on cross streets and behind you. If you see an emergency vehicle approaching,

please pull over to the right side of the road and allow it to pass.

ESD9290_MANL.indd 14-15

12/15/09 3:01 PM

Advertising