226 stability control – FORD 2013 F-550 v.1 User Manual

Page 227

Advertising
background image

AdvanceTrac® with RSC® Features

(Single rear wheels only)

Button functions

Stability

control

light

RSC®

ESC

TCS

Button pressed
momentarily

Illuminated

solid

Enabled

Enabled

1

Disabled

Button pressed and
held for more than
5 seconds at vehicle
speed under 35 mph
(56 km/h)

Flashes then

illuminated

solid

2

Disabled

Disabled

Disabled

Vehicle speed
exceeds 35 mph
(56 km/h) after
button is pressed
and held for more
than 5 seconds

Illuminated

solid

Enabled

Enabled

1

Disabled

Button pressed again
after deactivation

Not

illuminated

Enabled

Enabled

Enabled

Transfer case
switched to 4WD
Low

3

Illuminated

Disabled

Disabled

Disabled

1

Electronic stability control has reduced sensitivity compared to fully

active system.

2

Lamp light starts blinking for four seconds after entering the press and

hold state.

3

Engaging 4WD Low locked automatically disables roll stability control,

electronic stability control and the traction control system.

226

Stability Control

2013 F-250/350/450/550 (f23)
Owners Guide gf, 1st Printing
USA
(fus)

Advertising
This manual is related to the following products: