Programming/changing optional settings, Clearing all mykeys, Checking mykey system status – FORD 2013 F-550 v.1 User Manual

Page 69: Clearing, System status, 68 mykey

Advertising
background image

Programming/Changing Optional Settings

Note: All programmed keys can be cleared within the same key cycle in
which a key was programmed, otherwise an admin key is required to
clear the keys. To clear all keys, see Clearing all MyKeys.

You can access the optional settings through the information display control.
1. Turn the ignition on using an admin key.
2. Access the main menu and select Settings, then MyKey.
3. Use the arrow buttons to get to an optional feature.
4. Press OK or > to scroll through settings.
5. Press OK or > to make a selection.

CLEARING ALL MYKEYS

Note: All programmed MyKeys can be cleared within the same key cycle
in which a MyKey was created, otherwise an admin key is required to
clear the keys.

To clear all MyKeys (which removes all restrictions and returns them to
admin key status), use the information display controls to do the following:

For Type 1 information display settings
1. Press SETUP until PRESS RESET TO CLEAR MYKEY is displayed.
2. Press and release the RESET button. HOLD RESET TO CONFIRM

CLEAR is displayed.

3. Press and hold the RESET button for two seconds until ALL

MYKEYS CLEARED is displayed.

For Type 2 information display settings
1. Access the main menu and select Settings, then MyKey.
2. Scroll to Clear All and press the OK button.
3. Hold the OK button until ALL MYKEYS CLEARED is displayed.

CHECKING MYKEY SYSTEM STATUS

The information display controls provide information about keys
programmed to the vehicle:

MYKEY MILES: Tracks mileage when a MyKey is used. If mileage

does not accumulate as expected, then the MyKey is not being used
by the intended user. The only way to reset this to zero is by clearing
MyKeys. If the mileage is lower than the last time you checked, then
the key system has been recently reset.

# MYKEY(S): Indicates how many MyKeys are programmed to the

vehicle. Can also be used to detect deletion of a MyKey.

# ADMIN KEY(S): Indicates how many admin keys are programmed

to the vehicle. Can also be used to detect if an additional key has
been programmed to the vehicle.

68

MyKey

2013 F-250/350/450/550 (f23)
Owners Guide gf, 1st Printing
USA
(fus)

Advertising
This manual is related to the following products: