Myford touch – FORD 2013 Fusion v.2 User Manual

Page 384

Advertising
background image

Pairing Your Phone for the First

Time

WARNING

Driving while distracted can result in
loss of vehicle control, crash and
injury. We strongly recommend that

you use extreme caution when using any
device that may take your focus off the
road. Your primary responsibility is the safe
operation of your vehicle. We recommend
against the use of any handheld device
while driving and encourage the use of
voice-operated systems when possible.
Make sure you are aware of all applicable
local laws that may affect the use of
electronic devices while driving.

The first thing you must do to use the
phone features of SYNC is to pair your
Bluetooth-enabled cellular phone with
SYNC. This allows you to use your phone
in a hands-free manner.

Note: Put the transmission in position P.
Turn on your vehicle ignition and the radio.

1.

Touch Add Phone in the upper left
corner of the touchscreen. Find SYNC
appears on the screen, and instructs
you to begin the pairing process from
your device.

2. Make sure that Bluetooth is set to On

and that your cellular phone is in the
proper mode. See your phone’s manual
if necessary.

Note: Select SYNC, and a six-digit PIN
appears on your device.

3. If you are prompted to enter a PIN on

your device, it does not support Secure
Simple Pairing. To pair, enter the PIN
displayed on the touchscreen. Skip the
next step.

4. When prompted on your phone’s

display, confirm that the PIN provided
by SYNC matches the PIN displayed
on your cellular phone.

5. The display indicates when the pairing

is successful.

SYNC may prompt you with more phone
options. For more information on your
phone's capability, see your phone's
manual and visit the website.

Pairing Subsequent Phones

Note: Put the transmission in position P.
Turn on your vehicle ignition and the radio.

1.

Press the Phone corner of the
touchscreen > Settings > BT Devices
> Add Device.

2. Make sure that Bluetooth is set to On

and that your cellular phone is in the
proper mode. See your phone's manual
if necessary.

3. When prompted on your phone's

display, enter the six-digit PIN provided
by SYNC on the screen. The display
indicates when the pairing is
successful.

SYNC may prompt you with more phone
options. For more information on your
phone's capability, see your phone's
manual and visit the website.

Making Calls

E142599

Press the voice button on your
steering wheel controls. When
prompted, say, "Call <name>"

or say "Dial", then the desired number.

E142632

To end the call or exit phone
mode, press and hold the phone
button.

Receiving Calls

During an incoming call, an audible tone
sounds. Call information appears in the
display if it is available.

382

MyFord Touch™

(If Equipped)

Advertising