Mykey troubleshooting, Mykey – FORD 2013 Fusion v.2 User Manual

Page 52

Advertising
background image

MYKEY TROUBLESHOOTING

Potential Causes

Condition

· The key in the ignition does not have admin
privileges.

I cannot program a key.

· The key in the ignition is the only admin
key (there always has to be at least one
admin key).
· The intelligent access key is not in the
backup slot (vehicles with push-button
start).
· SecuriLock® passive anti-theft system is
disabled or in unlimited mode.

· The key in the ignition does not have admin
privileges. I cannot program the optional
settings.

I cannot program the optional settings.

· No keys are programmed to the vehicle.
See Creating a MyKey (page 48).

· The key in the ignition does not have admin
privileges.

I cannot clear the restricted keys.

· No restricted keys are programmed to the
vehicle. See Creating a MyKey (page 48).

· Purchase a new key from your authorized
dealer.

I lost the only admin key.

· Program a spare key. See Passive Anti-
Theft System (page 58).

I lost a key.

· An admin fob is present at engine start-
up.

No restricted key functions with intelligent
access key (push-button start).

· No MyKey keys are programmed to the
vehicle. See Creating a MyKey (page 48).

· The MyKey key is not being used by the
intended user.

MyKey miles do not accumulate.

· The key system has been reset.

50

MyKey™

(If Equipped)

Advertising