Tire change procedure, Roadside emergencies – FORD 2012 Escape v.1 User Manual

Page 259

Advertising
background image

6. If not replacing the spare or flat
tire to the underbody storage area,
raise winch up into the installed
position.

7. Use the attached fastener strap
(2) to tie the tether end to the
winch actuator shaft (if equipped).

Tire change procedure

WARNING: When one of the front wheels is off the ground, the
transmission alone will not prevent the vehicle from moving or

slipping off the jack, even if the vehicle is in P (Park) (automatic
transmission) or R (Reverse) (manual transmission).

WARNING: To help prevent the vehicle from moving when you
change a tire, be sure the parking brake is set, then block (in

both directions) the wheel that is diagonally opposite (other side and
end of the vehicle) to the tire being changed.

WARNING: If the vehicle slips off the jack, you or someone else
could be seriously injured.

WARNING: Do not attempt to change a tire on the side of the
vehicle close to moving traffic. Pull far enough off the road to

avoid the danger of being hit when operating the jack or changing the
wheel.

1. Block the diagonally opposite
wheel.

Roadside Emergencies

259

2012 Escape (204)
Owners Guide, 1st Printing
USA
(fus)

Advertising
This manual is related to the following products: