Replacing fog lamp bulbs (if equipped), Lights – FORD 2012 Escape v.1 User Manual
Page 64
Advertising
Replacing fog lamp bulbs (if equipped)
1. Make sure the fog lamp switch is
in the off position.
2. From underneath the vehicle,
carefully disconnect the electrical
connector from the bulb.
3. Remove the bulb from the lamp
assembly by pulling out the bulb
while squeezing the upper and lower
snap clips at the same time.
Install the new bulb in reverse
order.
Lights
64
2012 Escape (204)
Owners Guide, 1st Printing
USA (fus)
Advertising
This manual is related to the following products: