Setup menu, Driver controls – FORD 2008 Expedition v.1 User Manual

Page 126

Advertising
background image

5. The compass is now calibrated.

Setup menu

This menu allows the user, via the RESET stem located in the
instrument cluster, to interface and control the information displayed in
the message center for following selectable features:
• System Check
• Oil life
• Units (English/Metric)
• Autolamp
• Autolock
• Autounlock
• Language (English/French/Spanish)
Press and release the RESET stem to scroll through the INFO MENU
until following message “HOLD RESET FOR SETUP MENU” appears in
the display.

A brief press of the RESET stem
causes the display to turn OFF.
Press and release the RESET stem
to exit the

ЉblankЉ display mode.

To access the SETUP MENU, press
and hold the RESET stem until the
following message “HOLD RESET FOR SYSTEM CHECK” appears in the
display.

Note: The first selection in the
SETUP MENU is System Check. To
get into System Check, press and
hold the RESET stem for 2 seconds.

To skip the System Check entry,
briefly press the RESET stem to
scroll through the remaining SETUP MENU display sequence. If the
RESET stem is not pressed within 4 seconds, the message center display
returns to the SETUP MENU entry message “HOLD RESET FOR SETUP
MENU”.

2008 Expedition (exd)
Owners Guide (post-2002-fmt)
USA
(fus)

Driver Controls

126

Advertising